Sign In
Register
Help
Protect your wrists from the MacBook’s sharp edges. [more]
Page 1 of 1
Mac Gems Weblog: MacBook wrist-saver
#1
Macworld.com 
- Veteran
-
- Group: Members
- Posts: 1,900
- Joined: 06-February 04
Posted 26 July 2006 - 09:50 AM
MultiQuote
#4
macaddiict
- Newbie
-
- Group: Members
- Posts: 8
- Joined: 25-May 05
Posted 26 July 2006 - 09:12 PM
My roommate has had a MacBook since the week they were released, and she is constantly saying how uncomfortable the wrist rest is. It isn't bad when you're sitting at the computer, but when you're using it on the couch in your lap or laying in bed with it up on your legs it is absolutely painful. I've wondered if using some fine grit sandpaper right on the sharpness would work -- has anyone come up with a solution?
#5
sparky67
- Member
-
- Group: Members
- Posts: 148
- Joined: 10-December 05
Posted 27 July 2006 - 12:38 AM
Quote:
I've wondered if using some fine grit sandpaper right on the sharpness would work -- has anyone come up with a solution?
I've wondered if using some fine grit sandpaper right on the sharpness would work -- has anyone come up with a solution?
Me too. Or maybe a quick hit with a fine sanding block just to ever so slightly break the edge. I doubt you could even see a difference but I'd bet you could feel a huge improvement.
And for all those people that say it's not proper form if your wrists touch the edges ... IT'S NOT A TYPEWRITER!
Geesh! You read some, you type some, you read some, you interact a little, you use the mouse (trackpad), and you read some more. Are you really supposed to sit erect with your hands hovering over the keyboard in perfect QWERTY position at all times as if ready to take a dictation from Mr. Slate at 80 words per minute? LOL - I don't think so.
#6
Dan Frakes
- Advanced Member
-
- Group: Moderators
- Posts: 3,765
- Joined: 14-April 03
Posted 27 July 2006 - 12:47 AM
Quote:
MarWare has something similar.
MarWare has something similar.
I tested Marware's solution, as well. The problem with it is that it has two rectangular cutouts for the MacBook lid's "nubs." And the edges of those cutouts ended up being even more irritating than the MacBook's sharp edges.
Quote:
Sure, protect your wrists while at the same time making your sleek & beautiful MacBook look completely ugly.
Sure, protect your wrists while at the same time making your sleek & beautiful MacBook look completely ugly.
Personally, I don't think the colored ones look that bad. And the white set -- which is the one I tested -- actually looks quite nice.
#7
craigb6
- Newbie
-
- Group: Members
- Posts: 2
- Joined: 25-May 06
Posted 27 July 2006 - 05:32 AM
Does anyone know if the Invisible Shield works in the same way as the softpads? When I hopefully get my MacBook (for school use, once I convince my parents) I am planning on getting the Invis Shield, but I'm not sure if it will cover the 'sharp edge'. These pictures show one covering the wrist pads of the MacBook, but I'm not sure which bit is 'sharp' Shield Review . Thanks.
#8
Dan Frakes
- Advanced Member
-
- Group: Moderators
- Posts: 3,765
- Joined: 14-April 03
Posted 27 July 2006 - 07:41 PM
It doesn't look like the InvisibleShield pieces cover the sharp edge.
#9
deviljiru
- Newbie
-
- Group: Members
- Posts: 1
- Joined: 29-July 06
Posted 29 July 2006 - 10:39 PM
check out ShuffleArt Koobniks
#10
feefer
- Member
-
- Group: Members
- Posts: 283
- Joined: 19-December 05
Posted 31 July 2006 - 01:03 PM
And I thought I was the only one... /forums/ubbthreads/images/graemlins/blush.gif But wow, $20? Kinda steep... I guess use Mac users have a big sucker bulls-eye painted on our foreheads when it comes to paying alot for stuff. /forums/ubbthreads/images/graemlins/wink.gif
Here's what I did: I had a few thin foam pads around that were included as standard accessories for modular office furniture. I took two of these, and placed them adjacent to the edges on my 17" PowerBook. These pads are black, and actually look rather nice on silver. Flat black and silver: not bad.
To improve comfort, the pads don't actually have to cover the edges, but simply provide an elevated surface that allows your arm/hand rest on them so you don't encounter the edge of the Book as much. These pads also help protect the screen from marring when transporting, as they slightly provide a bit of height. But not too much height, as you'll impede lid closure: too high, and you're probably putting greater pressure and wear and tear on the hinge mechanism.
Chris
Here's what I did: I had a few thin foam pads around that were included as standard accessories for modular office furniture. I took two of these, and placed them adjacent to the edges on my 17" PowerBook. These pads are black, and actually look rather nice on silver. Flat black and silver: not bad.
To improve comfort, the pads don't actually have to cover the edges, but simply provide an elevated surface that allows your arm/hand rest on them so you don't encounter the edge of the Book as much. These pads also help protect the screen from marring when transporting, as they slightly provide a bit of height. But not too much height, as you'll impede lid closure: too high, and you're probably putting greater pressure and wear and tear on the hinge mechanism.
Chris
#11
VicTheHun
- Newbie
-
- Group: Members
- Posts: 7
- Joined: 08-December 03
Posted 13 November 2006 - 04:16 PM
I'm not taking the chance. Finally got my MacBook Pro. I just ordered TiArmor, which is the same thing I used to cover my Titanium PowerBook damage.
It's a lot softer to the touch than the metal surface, also.
It's a lot softer to the touch than the metal surface, also.
#12
jmlowe
- Newbie
-
- Group: Members
- Posts: 1
- Joined: 07-August 08
Posted 07 August 2008 - 02:46 PM
There's a much simpler (and cheaper) solution to be found on "Jonathan's Coffeeblog" (http://www.doublesquids.net/coffeeblog/archive/freedbac.html). Not bad for less than two bucks. That solution was posted two years ago!
The iLap by RainDesign is also said to be an exellent solution if you want to spend $45. I haven't tried it.
The question is, if Apple's not going to do something about this issue, why doesn't some enterprising third party come up with a cheap, practical solution. From the blog above, with a little creative thinking, it's not that difficult.
The iLap by RainDesign is also said to be an exellent solution if you want to spend $45. I haven't tried it.
The question is, if Apple's not going to do something about this issue, why doesn't some enterprising third party come up with a cheap, practical solution. From the blog above, with a little creative thinking, it's not that difficult.
#13
space1nvaders
- Newbie
-
- Group: Members
- Posts: 1
- Joined: 23-November 09
Posted 23 November 2009 - 07:44 AM
Simple solution I found is a couple pieces of Scotch Tape over the edge. It comes off easy and is barely visible (depending the tape used).
Apple should correct this IMO because the computer is 99% perfect to me and that 1% would just finish it off as the best computer on the planet. I have the 17 inch but I am sure the tape would work on the others.
Why couldn't Apple let you bring it into the store and have someone trained just smooth it off for you? We don't need those sharp point where you open it. This could be smooth. I don't think we should do it because of the warranty and fear or ruining it. We shouldn't need an accessory.
Apple should correct this IMO because the computer is 99% perfect to me and that 1% would just finish it off as the best computer on the planet. I have the 17 inch but I am sure the tape would work on the others.
Why couldn't Apple let you bring it into the store and have someone trained just smooth it off for you? We don't need those sharp point where you open it. This could be smooth. I don't think we should do it because of the warranty and fear or ruining it. We shouldn't need an accessory.
Page 1 of 1
