I have a PowerMac G4 Dual 1Gig Quicksilver. And this just happened after 4 years of bliss. When I got home from work the other night and powered on my mac. The power light on the computer came on and I heard that wonderful start up chime. However, my monitor failed to come on. In fact my monitor (a 17" clear case studio monitor), the little power light (for lack of a better tearm) on the lower right hand corner, failed to come on. Now I want to know, is it a monitor problem, a video card problem, or something much much worse? And help will be greatly appreciated.
Page 1 of 1
Dead 17" monitor
#3
Posted 23 June 2005 - 07:30 AM
I also have a monitor problem with my G3 Blue & White...It has worked fine for 6 years then a few months ago it started making a crackling sound when I turned it on...It slowly got louder with each day until finally the monitor made a LOUD cracking sound and seemed to spark slightly when I tried to turn it on and the screen was black...I purchased a refurbished monitor ( exactly the same as my old one ) from PowerOn Services Their webpage and it worked fine for a few days , but now the crackling has returned....I am wondering if there is something wrong with the video card ?....Do they where out ??....unfortunately , attaching it to another computer is not an option since it is the only one I have....Thank you for your time and knowledge /forums/ubbthreads/images/graemlins/smile.gif
Rick
Rick
#4
Posted 23 June 2005 - 02:23 PM
Look at the Tip at the end of the PRAM section in this site. Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
http://www.geocities.com/texasmacman/pram.html
Cheers, Tom
Mac Troubleshooting, Maintenance & Tips
http://www.geocities.com/texasmacman/MacTroubleshoot.html
http://www.geocities.com/texasmacman/pram.html
Cheers, Tom
Mac Troubleshooting, Maintenance & Tips
http://www.geocities.com/texasmacman/MacTroubleshoot.html
#5
Posted 23 June 2005 - 02:52 PM
Rick, crackling sounds from the monitor are a pretty good sign of a hardware failure. I don't think a video card would cause this. It's more likely that that model monitor has a common cause of failure (analog board failures in CRT displays are not uncommon.) Maybe you can send the refurbished unit back for repair or replacement and try again.
Page 1 of 1



Sign In
Register
Help

MultiQuote